STAMP-PERFECT hand stamp machine is the answer to anyone that has ever thrown away a piece of jewelry or an identification plate as a result of a mis-hit hand stamp mark. Never make a partial or misaligned hand stamp mark again.

Engineered to use Steelstamp.com’s Standard and Custom font hand stamps, Upper or Lower Case, from 1/16” to 1/4“character. Can be used with most other manufacturers stamps. Custom designs and logo stamps can be used in the machine as well.

STAMP-PERFECT holds your hand stamp straight and square while providing a consistent hammer blow for uniform character mark depth. The strength of the hammer blow (and the depth of mark) is controlled by tightening or loosening of the adjusting cap at the top of the energy section.

One QUICK CHANGE STAMP HOLDER 250 is included with the machine to allow use of standard 1/4” square body hand stamps. Hand stamps with 1/4” square bodies normally range in character heights from 1/16” to 1/8”

Optional QUICK CHANGE STAMP HOLDER 375 is available for 3/8” square body hand stamps. Hand stamps with 3/8” square bodies normally range in character heights from 3/16” to 1/4”.

The machine is equipped with a hardened anvil plate on which you may align and tape your piece to be marked. Base plate has graduated marks every 1/8” to assist in indexing to the next stamp position, resulting in evenly spaced characters when marking.

STAMP-PERFECT magnetic tape or our custom anvil plates makes set up and positioning of your piece to be marked fast and easy.

NO TOOLS REQUIRED TO OPERATE. All adjustments are made by hand. STAMP-PERFECT hand stamp machine measures 5” x 10” x 10” high. Weight is 9.5 pounds

5 YEAR WARRANTY ON ALL PARTS AND WORKMANSHIP. Warranty is VOID if machine has been disassembled or abused.